Printing A List Of Your One-Touch Numbers; Using Speed-Dial Numbers; Entering Or Changing A Speed-Dial Number - Muratec MFX-1500 Operating Instructions Manual

Beyond the basics
4. Press . The display shows:
ENTER
Erase One-Touch
Check Program/Enter
Important: If you want to quit without erasing the one-touch number
you've selected, press
step 3.
5. Press to erase the number.
ENTER
Erase One-Touch
** Complete **
To erase another one-touch number, repeat steps 3–5. Or press
to standby mode.

Printing a list of your one-touch numbers

Whoops! Forgot which number is "in" which one-touch key? Don't worry: just print a
list of your one-touch numbers. The list includes each key's identifier, the Location
any), number and group number(s) (if any) you've stored in the key:
To print the list, press , . 3,
PROGRAM A ENTER

Using speed-dial numbers

As we mentioned before, your fax machine will store up to 128 speed-dial numbers,
designated by three-digit identifier codes from 001 (the first number) through 128.
Important: When entering the identifier code for a speed-dial number, you
must enter leading zeroes, if necessary, to make three digits (e.g., 001 or
027). Of course, speed-dial numbers 100–128 don't require leading
zeroes.

Entering or changing a speed-dial number

Important: To erase a number, see "Erasing a speed-dial number" (page 2.15).
1. If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press
COPY
2.
Press , , 1, . Depending on whether you already have a
PROGRAM B ENTER
number entered for speed-dial number 001, the display shows:
Enter Speed-Dial No.
001:No Number Stored
If 001 is the speed-dial number you want to set, skip to step 4. (However, our
examples from here will say "005" rather than "001. " )
2.12
. The fax will return to
PROGRAM
to return
STOP
.
/ to change to Fax mode.
FAX
Enetr Speed-Dial No.
or
001:9-555-584-6950
3. Use the numeric keypad to enter the desired speed-dial number's
three-digit identifier code. Here, we've entered 005 and the display
shows either:
Enter Speed-Dial No.
005:No Number Stored
4.
If you change your mind and wish to select a different speed-dial number, just
repeat step 2 until the desired number appears, then go on to step 5.
5.
Press . Depending on whether you already have a number entered for
ENTER
this speed-dial number, the display now shows either:
005:Fax Number
_
6.
Use the numeric keypad to enter the speed-dial number exactly as your
machine should dial it, including whatever access codes your phone system
may require. (You may want to review "Special dialing characters," page 2.8.)
(if
ID The number can be up to 40 characters in length:
005:Fax Number
9-1-555-567-1234_
Your display can show only 20 characters at a time. To view characters beyond
those 20 (such as with an international long-distance number), press
scroll leftward or
Note: If you make a mistake or want to erase characters entered in a
previous setting, press
change just one character in the number, press
leftward, or
CANCEL
it.
7.
When the number is as you want it, press
Enter Speed-Dial No.
or
005:9-555-397-0123
005:Fax Number
or
9-555-397-0123_
to scroll rightward.
to erase leftward. Or, if you want to
CANCEL
to move it rightward, to that character and press
to erase it. Then re-enter until the number is just as you want
to store it.
ENTER
to
to move the cursor