Muratec MFX-1500 Operating Instructions Manual page 97

Beyond the bas cs
17. Each bulletin box has four additional settings:
Protected reception (shown on the display as "Rx Protect")
Automatic printing ("Auto Print")
Document overwriting ("Overwrite Doc.")
Erasure of transmitted documents ("Erase Tx Doc.")
We will now explain all four. For each: to toggle its displayed choice
between Off and On, press
PROGRAM
appears. Then press to save the choice and proceed to the next
ENTER
setting. When you complete the last setting (erasure of transmitted
documents), you'll move on to step 18.
Protected reception determines whether this box is open to receive
documents which callers may poll.
Rx Protect :Off
Program/Enter
If protected reception is On, this box will not accept documents
(making the next two settings irrelevant, although the machine will
show them anyway).
If protected reception is Off, this box will accept documents.
Make your choice and press
Automatic printing determines whether the machine will print a document
automatically upon receiving it into this box:
Auto Print :Off
Program/Enter
Note: This setting has effect only if protected reception (see above)
is set to Off.
If automatic printing is On, documents will print automatically as soon
as the box receives them.
If protected reception is Off, you will have to print manually any
documents this box receives if you want them printed. (For more
information, see page 2.56.)
Make your choice and press
2.52
repeatedly until your desired choice
to proceed to the next setting.
ENTER
to proceed to the next setting.
ENTER
Document overwriting determines whether the box will overwrite (erase)
any documents it is currently storing whenever it receives a new document:
Overwrite Doc. :Off
Program/Enter
Note: This setting has effect only if protected reception (see left
column) is set to Off.
If document writing is On and your machine receives a new document
into this box, it will erase any documents currently stored there.
If document writing is Off and your machine receives a new document
into this box, it won't erase any documents currently stored there. Your
machine can store up to 30 documents (not pages) in each box.
Make your choice and press
Erasure of transmitted documents, the final setting for the bulletin box,
determines whether the machine erases a document from the box after a
caller polls the document:
Erase Tx Doc. :OFF
Program/Enter
If this setting is On, your machine erases a document from the box
as soon as it sends it; thus, this bulletin box can be polled only once
per document.
If this setting is Off, your machine does not erase a document from the
box when it is polled. As long as your unit holds
not otherwise erase the document from the box, the document is
available indefinitely for polling.
Make your choice and press
bulletin box and proceed to step 18.
18.
The display now shows:
03:Set F-Code Box
F-Code Passcode:0000
The machine is asking for this bulletin box's four-digit security passcode.
This passcode affects only the box's bulletin box capabilities, and is not
the same passcode you entered in steps 6–7. If you set this passcode, you
subsequently will have to enter the passcode before you can make any
changes to the box's security box settings or before you either can print or
view any document received in this bulletin box.
If you do wish to enter or change this passcode, proceed to step 19.
If this is a newly created box and you do not wish to enter this passcode,
enter 0000 (four zeroes), then skip to step 21.
If this is a previously created box and you do not wish to change this
passcode, skip to step 21.
to proceed to the next setting.
ENTER
power and you do
AC
to finish the settings for this
ENTER