Printing A Stored Document; Erasing A Document Stored In A Bulletin Box - Muratec MFX-1500 Operating Instructions Manual

Beyond the bas cs

Printing a stored document

You can print — without erasing it from memory — a document stored in an F-
Code bulletin box set up on your fax machine. Here's how:
1.
If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press
COPY
2. Press , , 4. The display will show:
PROGRAM P
P4 Print F-Code Doc.
Program/Enter
3. Press .
ENTER
Select F-Code Box
01:Murata Machinery
If this is the box storing the document you want to print, skip to step 5.
Otherwise, proceed to step 4.
4. Use the numeric keypad to enter the two-digit number (01–50) of the
bulletin box currently "holding" the document you wish to print. We've
entered 03.
Select F-Code Box
03:Muratec America
5.
Press . The display will show:
ENTER
03:Print F-Code Doc.
F-Code Passcode:****
Note: If you have not previously set this box's passcode, this message
won't appear; in that event, skip to step 8.
6.
Use the numeric keypad to enter your F-Code's four-digit passcode.
Here we've entered 2345.
03:Print F-Code Doc.
F-Code Passcode:2345
7.
Press .
ENTER
Note: If you enter an invalid passcode, the fax machine will reject the
attempt and abort this operation.
8. The display shows:
03:Print F-Code Doc.
File No. _
9. Use the numeric keypad to enter the document's file number (1–30).
Note: If you wish to print all documents currently stored in the bulletin
box, simply enter 0 (zero).
2.56
/ to change to Fax mode.
FAX
10.
Press . Your fax machine will print the desired document(s), then
ENTER
return to standby mode.

Erasing a document stored in a bulletin box

It's easy to erase a document stored in a bulletin box set up on your fax machine:
1.
If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press
COPY
2. Press , , 6. The display will show:
PROGRAM P
P6 Erase F-Code Doc.
Program/Enter
3. Press .
ENTER
Select F-Code Box
01:Murata Machinery
If this box holds the document you want to erase, skip to step 5.
Otherwise, proceed to step 4.
4. Use the numeric keypad to enter the number (01–50) of the bulletin box
currently "holding" the document you wish to erase. We've entered 03.
Select F-Code Box
03:Muratec America
5. Press . The display will show:
ENTER
03:Erase F-Code Doc.
F-Code Passcode:****
Note: If you have not previously set this box's passcode, this message
won't appear; in that event, skip to step 8.
Note: If you select a security box rather than a bulletin box, the machine
beeps and, before returning to step 4, briefly displays:
Select F-Code Box
In Secure Box
Select a true bulletin box in step 4 and continue.
6. Use the numeric keypad to enter this F-Code's four-digit passcode.
Here we've entered 2345.
03:Erase F-Code Doc.
Enter Passcode:2345
7. Press .
ENTER
Note: If you enter an invalid passcode, the fax machine will reject the
attempt and abort this operation.
/ to change to Fax mode.
FAX