Using A Security Box; Printing A Document - Muratec MFX-1500 Operating Instructions Manual

8. The display will show:
03:Erase F-Code Doc.
File No. _
9. Use the numeric keypad to enter the document's file number (1–30).
Note: To erase all documents stored in this box, enter 0 (zero).
10.
Press . The fax machine now gives you one last chance to change
ENTER
your mind about the erasure.
03:Erase F-Code Doc.
Check Program/Enter
Important: To quit without erasing this or any other document, press
or
PROGRAM STOP
mode.
11. Press . The fax machine will erase the desired document, then
ENTER
return to standby mode.
. The machine will return to standby

Using a security box

If using an F-Code box as a security box, you cannot store documents in it by
scanning; it is for receiving only.

Printing a document

When your machine receives a document via
fax machine, your machine will print a message alerting the person for whom
the document is intended. Then the person has a certain number of days (see
page 2.53) in which to print out the message before your machine erases it.
Note: For this operation to work, two things must be true:
You must know the security box's number.
You must know the four-digit passcode for the security box.
To print a received message from a security box:
1. If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press
COPY
2. Press , , 4. The display shows:
PROGRAM P
P4 Print F-Code Doc.
Program/Enter
3. Press .
ENTER
Select F-Code Box
01:Murata Machinery
If this box holds the document you want to print, skip to step 5.
Otherwise, proceed to step 4.
4. Use the numeric keypad to enter the two-digit number (01–50) of the
security box currently "holding" the document you wish to print. We've
entered 03.
Select F-Code Box
03:Muratec America
5.
Press . The display will show:
ENTER
03:Print F-Code Doc.
F-Code Passcode:****
Note: If the security box is holding no documents at this time, the
machine will display this briefly before returning to step 4:
Select F-Code Doc.
No Document Stored
In step 4, be sure to select a security box that is holding at least
one document.
Beyond the bas cs
- sub-addressing from another
ITU T
/ to change to Fax mode.
FAX
2.57