Setting Up A Delayed Transmission - Muratec MFX-1500 Operating Instructions Manual

Delayed transmission
Take advantage of lower evening and weekend long-distance rates with delayed
transmission. Your fax machine can store up to 99 delayed transmission commands,
each of which you can program up to 31 days in advance.
Important: If you program a full 99 delayed transmission commands, no further
memory transmission is possible until the machine performs at least one
of the delayed commands. (To review memory transmission, see page
1.23.) however, you always can transmit from the feeder by using on-
hook dialing or an optional handset.

Setting up a delayed transmission

Important: Your machine remembers only the day of the month, not the month itself,
when it's supposed to perform a delayed transmission. So, if, say, you
want your fax to do something at 5:05
setting sooner than 5:06
PM
To set up a delayed transmission:
1.
Press / to change to Fax mode, if necessary.
COPY FAX
2.
Insert the document and make any necessary adjustment as usual.
3.
Press
COMMUNICATION OPTIONS
1.Delayed
Comm.Option/Enter
4.
Press . The display shows the current day of the month, followed by the
ENTER
current time (in 24-hour format, as you'll recall):
Delayed
Enter Time: 06/17:16
5.
Use the numeric keypad to enter the day of the month and the time when you
want the fax to perform the delayed transmission.
Note: To move the cursor to a specific digit, press
leftward, or to move it rightward, to that digit.
Here, we've set the transmission to occur on the 11th at 11:05
Delayed
Enter Time: 11/23:05
on June 26, don't make that
PM
on May 26.
. The display will show:
to move the cursor
:
PM
6. When the date and time entry is as you wish, press
transmission. The display shows:
Enter Fax Number
_
7. Enter the fax number to which the delayed transmission should go. You may
either press a one-touch key, enter a speed-dial number or just use the numeric
keypad normally.
Note: If you make a mistake or want to erase characters entered in a
previous setting, press
CANCEL
change just one character in the number, press
leftward or to move it rightward, to that character and press
to erase it. Then re-enter until the number is just as you want
CANCEL
it.
8. Press . Your machine will return to its normal standby mode, while
START
showing this on the display:
** Reserved **
Sep 6 1998 17:17
This means your fax machine is "reserved" for the delayed transmission
command you just programmed.
If you had set the machine for transmission from memory, it will scan the
document into memory, after which you can use the machine normally.
If you had set the machine for transmission from the
receive faxes but can't transmit.
Beyond the basics
to save the delayed
ENTER
to erase leftward. Or, if you want to
to move the cursor
, the machine can
ADF
2.21