Muratec MFX-1500 Operating Instructions Manual page 16

12. — Helps you set up the process of a fax broadcast (sending
BROADCAST
the same document to more than one location).
13. Numeric keypad — Just like the numeric keys on a regular tone-dialing
phone. In addition to dialing phone and fax numbers, they also enter
numbers when you're making certain settings.
14. — Begins a manual fax transmission, manual reception or copying.
START
15. — Resets copying settings to their defaults.
CLEAR ALL
16.
— An all-purpose "Whoa!" key. Stops the current operation, ejects a
STOP
document from the automatic document feeder and cancels alarms.
17.
/ — Starts a speed-dialing operation, which you finish
SPEED DIAL TEL INDEX
by pushing three of the keys on the numeric keypad. Also displays one-
touch and speed dial entries sorted alphanumerically, as in a
telephone directory.
18. — Sets the fax for either letter- or legal-sized documents
BOOK DOC SIZE
when you use the flatbed scanner.
19. — Selects which transmission mode your fax uses,
MEMORY TRANSMIT
whether from memory or from the document feeder. If the light next to this
key is glowing, your fax will scan documents into memory before trying to
send them. Otherwise, your fax will transmit straight from the feeder,
which is slower and also prevents others in your office from using the fax
until your communication is absolutely complete. (When you use the
flatbed scanner, the machine always uses memory transmission.)
20.
— Press this key to delete characters on the
CANCEL
commands you have entered into the machine.
21.
In Fax mode:
/ — Redials the last number you dialed. In certain operations,
REDIAL PAUSE
it also produces a special pause character which can be useful during the
dialing of long-distance numbers.
Or, in Copy mode:
? — Selects the printout paper you want to use.
PAPER SIZE
22.
— Much as is a "Whoa!" key,
ENTER STOP
It confirms user settings, begins operations and moves through
command levels.
and cancel
LCD
is a "Go!" key.
ENTER
23.
In Fax mode:
— Press this to insert special symbols into telephone
DIALING OPTIONS
numbers (see page 2.8).
Or, in Copy mode:
— Press this key to toggle the sorting of printed copies.
SORT COPY
24.
In Fax mode:
/ — Scrolls (moves) through features and command options as
PROGRAM
displayed on the .
LCD
Or, in Copy mode:
Press to increase the reduction or enlargement rate at 1% intervals.
25. In Fax mode:
— Lets you quickly disconnect a call and go right to the next one
FLASH
without having to hang up the handset.
Or, in Copy mode:
% — Press this key to choose one of several fixed copy
ENLARGE
enlargement rates. (See page 1.34 for more information.)
26.
In Fax mode:
— Scrolls (moves) through features and command options as displayed
on the .
LCD
In Fax mode, while scanning a document:
— Press to tell your machine to scan one or more additional
NEXT
documents after the current scanning ends.
In Copy mode:
Press to decrease the reduction or enlargement rate at 1% interval.
27.
% — Press this key to choose one of several preset copy reduction
REDUCT
rates. (See page 1.34 for more information.)
28. —
RESOLUTION
In Fax mode:
Press to toggle among the three resolution modes and 64-level grayscale.
In Copy mode:
Press to select either superfine or 128-level grayscale mode.
29. — Press to enter the contrast setting mode. To change the
CONTRAST
contrast level, press or
30. / — Press this key to toggle between Fax mode or Copy mode.
COPY FAX
Getting started
keys.
1.7