Muratec MFX-1500 Operating Instructions Manual page 96

11. Use the numeric keypad to enter exactly the sub-address to identify this F-
Code box.
Note: The sub-address must be unique to this F-Code box; i. e., no other
F-Code box in this fax machine can have the same sub-address.
The sub-address can be up to 20 numbers in length. In this example, we've
entered 654321.
03:Sub-Address No.
654321_
Note: To erase previously entered characters, press
leftward. Or to change just one character in the number, press
to move the cursor leftward, or
character and press
CANCEL
number is just as you want it.
12. When the number is as you want it, press
Note: If you entered a sub-address number already being used by
another F-Code box, the machine will beep and briefly display
the following:
03:Enter Sub-Address
Sub-Address In Use
The machine now returns you to step 11. Please enter a different
number for your F-Code box's sub-address.
13. Next, the machine asks for your F-Code box's password. This is the
password for - -compatible F-Code fax transactions. (It is not a
ITU T
passcode your machine uses to control who can make settings for the box.)
If you set the password, a caller must know and use it in order to send a
fax to you via F-Code communication. You don't have to have a password
to use the F-Code box. However, using a password will make your F-Code
communications much more secure.
Important: Again, this is the password for
transactions. It's not the passcord the machine can use to
control user access to the F-Code box for, as an example,
making settings. You'll make that setting a few steps down
the line.
Depending on whether you already have a password entered for your
F-Code box, the display displays either:
03:Password
_
If you do wish to enter or change this box's password, proceed to step 14.
If you do not wish to enter or change this box's password, skip to step 15.
to erase
CANCEL
to move it rightward, to that
to erase it. Then re-enter until the
to store it.
ENTER
- -compatible F-Code fax
ITU T
03:Password
or
123456789*#_
14. Use the numeric keypad to enter this box's
This password can be up to 20 characters in length and can include any
combination of numbers and the * and # characters (but no other non-
numerical characters). Here, we've entered 135*7#9.
03:Password
135*7#9_
Note: To erase previously entered characters, press
leftward. Or to change just one character in the password, press
to move the cursor leftward, or
that character and press
password is just as you want.
15. Press . The display will show either:
ENTER
Box Type :Bulletin
Program/Enter
The machine is asking which box type you wish to assign to this box —
bulletin or security.
To select your desired box type (if it's not already on the display), press
to display your choice.
PROGRAM
16.
Press .
ENTER
If you chose Bulletin in step 15, proceed to step 17.
If you chose Security in step 15, skip to step 22.
Beyond the bas cs
- -compatible password.
ITU T
to erase
CANCEL
to move it rightward, to
to erase it. Then re-enter until the
CANCEL
Box Type :Security
or
Program/Enter
2.51