Setting Of Enlargement Or Reduction For Copying - Muratec MFX-1500 Operating Instructions Manual

3. Press ? repeatedly until the following display appears:
PAPER SIZE
Copy Ready Num: 1
Tray Enter
4.
Press .
ENTER
5.
Then, if necessary, press
PAPER SIZE
recording paper you placed document on the
either letter-, legal- or half-letter-sized paper.
Copy Ready
T:Ltr
T:Legl
Note: When you set the transparency film, please select "OHP" mode.
You can use letter-sized transparency film.
6.
If necessary, select desired resolution, contrast, reduction/enlargement rate.
(See "Setting of enlargement or reduction for copying," right column.)
7.
Press to begin the copying process.
START
1.34
? again to select a same size of
or . You can select
ADF FBS
Num: 1
100%
100%
T:HLtr 100%
T:OHP 100%
Setting of enlargement or reduction
for copying
Your fax machine is capable of enlargement and reduction when copying.
Note: The copy enlargement and reduction rate setting is available only for
copying, not for faxing.
Important: Copy enlargement is available only for copying using the
available for copying using the
To change the reduction or enlargement rate for copying, either select a preset rate
or directly enter a rate.
Selecting a preset rate
Either . . .
• Press to select one of the following fixed enlargement rates.
ENLARGE
100% 129% 200%
129%: Hhalf-letter Letter
. . . or . . .
• Press to select one of the following fixed reduction rates.
REDUCE
100% 78% 64%
78%: Legal Letter
64%: Ledger (11 × 17 ) Letter
Directly entering a rate
Using the numeric keypad, directly enter the reduction or enlargement rate by doing
one of the following.
Either . . .
1. Press #.
2.
Enter your desired rate using the numeric keypad. You can set any rate from
50% reduction through 200% enlargement.
3.
Press # again.
. . . or . . .
Press or to adjust the rate, at 1% intervals, from/including 50% reduction
through 200% enlargement.
; it is not
FBS
.
ADF
50%