How To Read This Manual; You're In Control! - Muratec MFX-1500 Operating Instructions Manual

Getting started
ALPHABET
31.
One-Touch Keys — The keys labeled 01-40 (or 41-80, if you're using
fliptab ) offer one-touch dialing convenience. You also can use the keys
B
labeled 73-80, if you're using fliptab
lets you teach your machine an advanced multi-step function just once,
then recall the function at any time by pressing one of these keys.

How to read this manual

Before you use this manual, read this list of symbols and terms, and make sure you
know what each denotes.
: A potential hazard that could result in serious injury.
WARNING
!
: A potential hazard that could result in minor injury.
CAUTION
!
Important: How to avoid conditions or incorrect operations that could cause
damage to your machine.
Note:
Helpful hints, restrictions, or how to avoid difficulties.

You're in control!

We've worked hard to make sure your fax machine is easy for you to use. You can
control it — not vice versa. So we've also tried to make these operating instructions
just as easy. In that spirit, let's make sure there's no confusion about how to give
your machine its marching orders.
1.8
SPACE
CODE
, for programmable functions: this
B
To press: 0 (zero), 1, 2, 3, 4, 5, 6, 7, 8, 9, # or *
Use: The numeric keypad.
Tip: At no (other) time within this manual will we refer to the letters
printed below the numeric keys, such as the abc by the 2 key. They are
there only for your greater convenience in using your fax machine as
a telephone.
To press: , , , ,
A B C D
which may be required with the use of optional equipment)
CODE
Use: The one-touch key by the name.
Tip: Please don't confuse the zero (0) with the letter O.
Here's an example.
If we say "press
PROGRAM
...you'd press
... and then (finally)
Important: Please note that you would not be entering any comma or period
characters. Those typographical characters appear in our instructions
merely to serve their usual separative functions and are not intended
for actual entry from your machine's control panel.
While there is a function (broadcasting) that requires the entry of
commas, we provide special ways to do that, as we'll explain when
the time comes.
, , , , , , , , , , , or (or other letter keys
E F G H I J K L M N O P
"...
, , , 0, 3,
J ENTER ENTER
PROGRAM
... then
J
... then
ENTER
... then 0
... then 3
ENTER