Table of Contents
Advertisement
Setting of enlargement or reduction for copying
Your fax machine is capable of enlargement and reduction when copying.
Note: The copy enlargement and reduction rate setting is available only for copy-
ing, not for faxing.
Important: Copy enlargement is available only for copying using the
available for copying using the
To change the reduction or enlargement rate for copying, either select a preset rate
or directly enter a rate.
Selecting a preset rate
Either . . .
• Press
to select one of the following fixed enlargement rates.
ENLARGE
200%
129% : Half-letter (5.5 × 8.5 )
100%
. . . or . . .
• Press
to select one of the following fixed reduction rates.
REDUCE
78%: Legal
Letter
64%: Ledger (11 × 17 )
Letter (8.5 × 11 )
Directly entering a rate
Using the numeric keypad, directly enter the reduction or enlargement rate by
doing one of the following.
Either . . .
1
Press #.
2
Enter your desired rate using the numeric keypad. You can set any rate from
50% reduction through 200% enlargement.
3
Press # again.
. . . or . . .
Press
or
to adjust the rate, at 1% intervals, from/including 50% reduction
through 200% enlargement.
FBS
.
ADF
Letter (8.5 × 11 )
Copy protection
With such a versatile copier built right into your fax machine, you might want to
make sure it doesn't become too tempting to some people whose unauthorized copy-
ing could deplete your machine's supplies more rapidly. So, to limit the use of your
fax machine to only sending and receiving faxes — in other words, to activate copy
; it is not
protection:
1
If the machine is in Fax mode, skip to step 2.
Otherwise, press
2
Press
PROGRAM
Copy Protect
Program/Enter
3
Press
PROGRAM
Copy Protect
Program/Enter
4
Press
ENTER
Copy Protect
**
Complete
While this setting is active, whenever someone tries to change the machine to Copy
mode, the machine will sound a brief alarm tone and display:
Fax Ready
Copy Off
Important: To turn off copy protection off so that you can again use the machine's
copying function, repeat steps 2-4, above (step 1 is unnecessary since
the machine will be in Fax mode) except that, in step 3, you press
PROGRAM
Copy Protect
/
to change to Fax mode.
COPY
FAX
,
, 0, 3,
.
J
ENTER
:Off
to turn on copy protection.
:On
**
so that the display shows:
:Off
Program/Enter
Getting started
1.31
Advertisement
Table of Contents
