Printing A Delayed Command List; Printing A Stored Document - Muratec F-160 Operating Instructions Manual

Printing a delayed command list

Your machine can print a command list which tells you:
• The command's identification number
• The phone number, or "remote location"
• The start time (this appears in a
• A "note" telling if the command is a polling or F-Code operation (see pages
2.29–2.31 for more on polling and 2.34–2.43 for more on F-Code communication).
To print a delayed command list, press /

Printing a stored document

Your fax machine can print out each document stored for delayed transmission. To
print a stored document, you'll need to know the document's command number,
which you can get by either reviewing the commands (see page 2.18) or printing a
delayed command list (see above).
1
Press / , , 2,
PROGRAM F ENTER
Print Stored Doc.
Command No.: _
2
Use the numeric keypad to enter the command's identification number, 01–99.
For example, we could enter the following for the very first command, 01:
Print Stored Doc.
Command No.: 01_
3
Press . Your fax machine will print a copy of the stored document.
ENTER
, : format)
DD HH MM
, , 1, .
PROGRAM F ENTER
. The shows:
LCD
Beyond the basics
2.19