Activity Response Setup - Dedicated Micros DV-IP Express Nstallation And Operation Manual

Activity Response Setup

This menu enables response configuration following activity trigger on a selected camera channel.
This option should be used in conjunction with the Activity Setup menu.
Channel
�cti�ity To Trigger
Copy To All
Create Database �ntry
�rofile Change
�larm Reporting
�larm 24Hr
Protect Alarm Images
Switch Spot �onitor
�nable in Day

Select the camera input for configuration from the drop down list.
Following �cti�ity acti�ation, select 'Simple Response' to trigger
specific chosen responses. Select 'Zone' to apply the Zone �nput
rules as configured in the Zone �nput menu. Refer to 'Zone Input'
for more information.
Select to copy the current Activity Response settings to all camera
channels.
�hen selected, an alarm entry will be added to the
��ent database.
Select to enable the unit to switch from Normal to ��ent recording
following alarm acti�ation.
This must be enabled to allow the unit to send an alarm
notification to an e�ternal destination i.e an R�RC reporting �ia
Net�u Obser�er.
This will ensure that �cti�ity Detection is permanently enabled on
this camera channel.
Select to automatically protect alarm images from
being o�erwritten.
�nable this option to display alarm acti�ated cameras on the
connected Spot �onitor.
This will enable �cti�ity Detection when the unit is in Day (Unset)
operation mode.
Dedicated Micros ©2009