Global Actions - Dedicated Micros DV-IP Express Nstallation And Operation Manual

Global Actions

This menu details how to configure the default relay actions supported on the unit.
The unit supports four onboard relay connections and global relay settings. These global relays can
be triggered under specific conditions i.e. on receipt of any alarm or any notification of
Activity Detection.
�mage �rotection �eriod
�larm Display �ode
Re�ert Display �ode after �larm �nable this setting to make the unit return to the �iew displayed
�larm Display �lert
�larm (Relay 1)
��D��cti�ity (Relay 2)

Select a time period (in days) that images associated with an
alarm will be protected from deletion.
�hen a relay has been triggered, the primary camera associated
with that relay can immediately be displayed on the local monitor.
Select 'Jump To �rimary Camera' from the drop down list to
acti�ate this function.
before the alarm acti�ation.
�nable this setting to display an alarm te�t alert in the colour
specified in '�larm Colour' in the Zone �ctions �enu.
Select this option to establish any alarm trigger as a Global Relay. Select this option to establish any alarm trigger as a Global Relay.
Therefore the relay will close when an alarm is recei�ed on any of
the alarm inputs.
Select this option to establish any �cti�ity Detection trigger as a Select this option to establish any �cti�ity Detection trigger as a
Global Relay. Therefore the relay will close when �cti�ity���D is
identified on any of the camera inputs.
Dedicated Micros ©2009