Zone Actions - Dedicated Micros DV-IP Express Nstallation And Operation Manual

Zone Actions

This menu allows actions to be allocated to individual alarm zones; Primary and Secondary cameras
can be allocated to the zone and actions undertaken following alarm activation. This page should be
configured in conjunction with the Zone Inputs menu.
Zone
�rimary Camera
Alarm Colour
Secondary Cameras
Create Database �ntry
�larm Relay
�rofile Change
�lay �udio
�larm Reporting
�rchi�e

Select a zone (alarm) to configure.
This allows a camera to be assigned as the primary camera
associated with the �larm Zone. The primary camera will be
displayed when an alarm in this zone is triggered.
This displays the local alarm text in the selected colour and can
be useful in prioritising alarms. Options a�ailable are Red, Green,
�lue, ��ellow, Cyan and �agenta.
This setting gives the facility to assign additional cameras to the
zone. These cameras will become part of the alarm sequence
shown in the �iewer menus when the alarm zone is triggered.
�n alarm acti�ation will be added to the database. The zone title
will be used as part of the entry information.
Select to trigger an alarm relay folowing zone acti�ation. Select
the specific relay �ia the 'Relay' option.
Select to enable the unit to switch from Normal to ��ent recording
following alarm zone acti�ation.
�t is possible to play associated audio upon zone alarm acti�ation.
This must be enabled to allow the unit to send an alarm
notification to an e�ternal destination i.e an R�RC reporting �ia
Net�u Obser�er.
Select to ensure the unit automatically downloads alarm images
�ia an FT� connection to an FT� ser�er.
Dedicated Micros ©2009