Vmd/Activity Response Setup - Dedicated Micros SD Advanced Installation And Operation Manual

VMD/Activity Response Setup

This menu enables response configuration following activity trigger on a selected camera channel.
Channel
Detection Type
Note: Whichever Detection option is selected here, will result in the camera channel being only
available for editing in the relevant configuration menu i.e. if Activity is selected for Channel 1;
this channel can only be edited for Detection in the Activity Setup menu and not the VMD
Configuration menu.
Activity To Trigger
Note: When Activity to Trigger is set to 'Zone'; the options detailed below are unavailable.
Copy To All
Create Database Entry
Profile Change
Alarm Reporting

Select the camera input for configuration from the drop down list.
Each camera input can be configured for either 'VMD' or 'Activity'
detection. To assign no detection settings to the camera, select
'None'
Following Activity activation, select 'Simple Response' to trigger
specific chosen responses from the options detailed below. Select
'Zone' to apply the Zone Input rules as configured in the Zone
Input menu. Refer to 'Zone Input' for more information.
Select to copy the current Activity Response settings to all
camera channels.
When selected, an alarm entry will be added to the
Event database.
Select to enable the unit to switch from Normal to Event recording
following alarm activation.
This must be enabled for the unit to automatically connect
on alarm.
Dedicated Micros ©2009