Event Settings - Dedicated Micros DV-IP Express Nstallation And Operation Manual

Event Settings

This menu allows actions to be established and configured for the Oracle Dome camera following
an alarm event. A Home position can be established for the camera and the delay time set for what
period of inactivity is required before the camera will be sent to its home position.
Camera
Camera Title
��ent Name
Type
Action
Relay
Home (Grey)
�ction
Delay
Save (Grey)
Dedicated Micros ©2009
Selected camera channel.
Displays the title assigned to the selected camera channel.
�f required, enter a specific name for the alarm e�ent.
Select the alarm type from:
E�L (End of Line), NC (Normally Closed), N� (Normally �pen)
or Disabled.
Select a preset position or a patrol action for the camera upon
alarm e�ent.
Select an action for the relay. Select '�omentary' for the relay to
momentarily switch state. Select 'Duration' to switch relay status
for the duration of the alarm.
Select to send the camera to its predetermined home position.
Select a preset or patrol from the accompanying drop down list.
This preset�patrol will now be set as the cameras 'home' position.
Select the time ( in seconds) for which the camera is inacti�e i.e.
no operator input, before returning to its home position.
Select to store Event Settings to the unit and the �racle Dome
camera memory.
10