Dedicated Micros DV-IP Express Nstallation And Operation Manual page 57

�re-Trigger (J��G)
Note: It is recommended that the Pre-Alarm option in the 'Alarm Settings-Zone Input' menu be set
to the same value as the Pre-Trigger setting. This will ensure successful playback of high
quality Pre-Trigger images. High quality pre-trigger images will only playback properly if
review (playback) starts prior to the pre-trigger initiation.
�re-Trigger Duration (secs)
Unset�Set�O�erride Normal
Unset�Set�O�erride ��ent
Comp
��S
�uality
Note: The higher the Quality setting, the greater the storage space needed.
Dedicated Micros ©2009
�nablng the �re-Trigger feature will buffer and store alarm
recording prior to an e�ent trigger (in J��G format). �t will use
the ma�imum a�ailable memory dependent on other cameras
requirements of the buffer space. Select '�nable' to acti�ate.
The �re-Trigger Duration is the ma�imum possible time that data
will be stored prior to an e�ent trigger.
Shows the recording profile used by the camera if no Timer
Functions are applied and the camera is operating under Normal
(non ��ent) conditions. Refer to the 'Schedules' section for further
details.
Shows the recording quality that will be used by the camera
during an �larm or ��ent. Note that Set and O�erride schedules
will be used only when Timed Schedules are applied. Refer to the
'Schedules' section for further details.
Select image compression format (���G or J��G).
The accompanying dropdown list allows the number of frames
captured per second to be set.
The pictures per second (pps) option allows either 6, 5, 2, 1, 0.5,
0.25 or 0.1 pps to be recorded.
�ictures can also be recorded at 'Real Time' speed, '3�4 Real
Time' or '1�2 Real Time'.
To disable record, choose the 'No Record' option.
Select 'User Defined' to use settings established in the �d�anced
�rofile Record menu.
The accompanying dropdown list allows the quality of recorded
images to be set. Select from �a�imum, �ery High, High,
�edium, or �ow. Select User Defined to use settings established
in the �d�ance �rofile Record menu.