Panel Information Page - AMX NXD-500i Operation/Reference Manual

Setup Pages and Descriptions
Project Information Page (Cont.)
AMX IR Ports:
Build Number:
Creation Date:
Revision Date:
Last Save Date:
Blink Rate:
Job Comments:

Panel Information Page

The Panel Information page (FIG. 42) centers around Modero panel properties that include resolution used, on-board
memory, firmware, address/channel information, and string information.
FIG. 42 Panel Information page
The elements of the Panel Information page are as follows:
Panel Information Page
Back:
Wired icon:
Connection Status icon: This visual display of the connection status allows the user to have a current visual update of
Panel Type:
Firmware Version:
Setup Port:
High Port:
High Address:
High Channel:
High Level:
Serial Number:
44
Displays the AMX 38 kHz IR channel port used by the IR receiver on the panel.
• This information is pulled by the panel from AMX IR Receivers section of the TPD4 Project
Properties > IR Emitters & Receivers tab.
• For IR reception, this is the port that reports a push on for the corresponding IR code.
• IR receivers and transmitters on G4 panels share the device address number of the panel.
Displays the build number information of the TPD4 software used to create the project file.
Displays the project creation date.
Displays the last revision date for the project.
Displays the last date the project was saved.
Displays the feedback blink rate (10th of second).
Displays any comments associated to the job. These comments are taken from the TPD4
project file.
Returns to the previously active touch panel page.
The icon to the left of the Connection Status Icon displays that the current connection to the
Master is Wired (image of three networked computers).
the panel's connection status, regardless of what page is currently active.
A Lock only appears on the icon if the panel has established a connection with a currently
secured target Master requiring a username and password.
Displays the model of the Modero panel being used.
Displays the G4 firmware version being used by the panel.
• Verify that the panel has the latest version from www.amx.com.
Displays the setup port information/value being used by the panel.
Displays the high port (port count) value for the panel.
Displays the high address (address count) value for the panel.
Displays the high channel (channel count) value for the panel.
Displays the high level (level count) value being used by the panel.
Displays the specific serial number value assigned to the panel.
NXD-500i 5" Modero Wall/Flush Mount Touch Panel with Intercom