AMX NXD-500i Operation/Reference Manual page 15

Product Specifications (Cont.)
Side Panel Components:
• Ethernet 10/100 port:
• Mini-USB connector:
Button Assignments:
Weight:
Certifications:
Operating / Storage
Environment:
Included Accessories:
Other AMX Equipment:
NXD-500i 5" Modero Wall/Flush Mount Touch Panel with Intercom
NXD-500i 5" Modero Wall/Flush Mount Touch Panel with Intercom
• RJ-45 port for 10/100 Mbps communication. The Ethernet port automatically negotiates
the connection speed (10 Mbps or 100 Mbps), and whether to use half duplex or full
duplex mode. Power is supplied through Power Over Ethernet (PoE)
• NXD-500i panels communicate with the NetLinx Master using the ICSP protocol over
Ethernet.
• LEDs show communication activity, connections, speeds, and mode information:
L/A-link/activity - yellow LED lights On when the Ethernet cables are connected and
terminated correctly and then blinks when receiving Ethernet data packets.
SPD-speed - Green LED lights On when the connection speed is 100 Mbps and turns
Off when the speed is 10 Mbps.
5-pin Mini-USB connector used for programming, firmware update, and touch panel file
transfer between the PC and the target panel. The connector is also used for providing
audio output for external speakers.
The mini-USB port automatically detects the presence of a headphone adapter, allowing
the port to be used for headphone connectivity.
Note: When connecting the panel to PC using a CC-USB (or compatible) cable, be sure
to power the panel On before attempting to connect the USB cable from the PC to the
mini-USB port on the panel. Refer to the Configuring and Using USB with a Virtual
Master section on page 22 for more information.
Button assignments can only be adjusted in TPD4 and not on the panel.
• Button channel range: 1 - 4000 button push and feedback (per address port)
• Button variable text range: 1 - 4000 (per address port)
• Button states range: 1 - 256 (General Button; 1 = Off State, 2 = On State)
• Level range: 1 - 600 (default level value 0-255, can be set up to 1-65535)
• Address port range: 1 - 100
• 0.80 lbs (0.36 kg)
• FCC Part 15 Class B
• CE
• IEC 60950
• RoHS
• Operating Temperature: 0° C (32° F) to 40° C (104° F)
• Operating Humidity: 5% - 85% relative humidity (non-condensing)
• Storage Temperature: -20° C (-4° F) to 60° C (140° F)
• Storage Humidity: 5% - 85% RH
• NXD-500i Installation Guide (93-2261-02)
• Front Bezel (60-2261-11)
• NXA-BEZ500 Mystique Style Bezel Kit (FG2261-48)
• NXA-BEZP-500 Portrait Bezel Kit (FG2261-10/11)
• CB-TP5i Rough-In/Wallbox (FG038-11)
• CB-TP5ib Back Cover for CB-TP5i Rough-In/Wallbox (FG038-12)
• NXA-TTS500 Table Top Stand (FG2261-40)
• PS-POE-AF PoE Injector (FG423-80)
• CC-USB Type-A to Mini-B 5-wire programming cable (FG10-5965)
• USB to Headphone Adaptor (FG5966-23)
• NXA-RK5 Rack Mount Kit for 5" Wall Mount panels (FG2904-55):
- 5" Rackmount
- Four Screws, #10-32 x.625, PH Truss, BLK
- Four Washers, #10, Black Nylon
- Three Screws, #4-40 x.250, PPH, BLK
3