Sensor Settings - AMX NXD-500i Operation/Reference Manual

Setup Pages and Descriptions

Sensor Settings

The Sensor Settings page (FIG. 57) allows adjustment of the Light and Motion Sensor parameters on a Modero touch
panel.
FIG. 57 Sensor Settings page
The elements of the Sensor Settings page are described in the table below:
Sensor Settings Page
Back:
Wired icon:
Connection Status icon: This visual display of the connection status allows the user to have a current visual update of
Light:
Light Sensor:
Motion Sensor:
58
Saves the changes and returns you to the previously active touch panel page.
The icon to the left of the Connection Status Icon displays that the current connection to the
Master is Wired (image of three networked computers).
the panel's connection status regardless of the page that is currently active.
• A Lock only appears on the icon if the panel has established a connection with a currently
secured target Master requiring a username and password.
The Light bargraph displays a vertical bargraph indicating the light level detected by the on-
board photo-sensor.
Allows the user to review the Modero panel light sensor port and channel settings:
• The Sensor Level field indicates the level used to report the light sensor level back to the
NetLinx Master (set in TPD4) (read-only).
• The Sensor Level Port field indicates the port used to report the light sensor level back to
the NetLinx Master (set in TPD4) (read-only).
• The Sensor Channel field indicates the level used to report the sensor channel back to the
NetLinx Master (set in TPD4). It is On when below the Light Sensor threshold level (read-
only).
• The Sensor Channel Port field indicates the port used to report the sensor channel back to
the NetLinx Master (set in TPD4) (read-only).
Provides the following fields:
• The Motion Detection field displays a reactive button that changes color (illuminates) when
motion is detected by the Modero panel's front motion sensor.
• The Motion Sensor Port field indicates the port used to report the motion sensor channel
back to the NetLinx Master (set in TPD4) (read-only).
• The Motion Sensor Channel field indicates the channel used to report the motion sensor
channel back to the NetLinx Master (set in TPD4) (read-only).
NXD-500i 5" Modero Wall/Flush Mount Touch Panel with Intercom