Programming
Panel Setup Commands
These commands are case insensitive.
Panel Setup Commands
^MUT
Set the panel mute state.
Syntax:
Variable:
Example:
Sets the panel's master volume to mute.
@PWD Set the page flip password. @PWD sets the level 1 password only.
Syntax:
Variables:
Example:
Sets the page flip password to 'Main'.
^PWD
Set the page flip password. Password level is required and must be 1 - 4.
Syntax:
Variables:
Example:
Sets the page flip password on Password Level 1 to 'Main'.
^VOL
Set the panel volume.
Syntax:
Variable:
Example:
Set the panel volume to 50.
148
"'^MUT-<mute state>'"
mute state= 0 = Mute Off and 1 = Mute On.
SEND_COMMAND Panel,"'^MUT-1''"
"'@PWD-<page flip password>'"
page flip password = 1 - 50 ASCII characters.
SEND COMMAND Panel,"'@PWD-Main'"
"'^PWD-<password level>,<page flip password>'"
password level = 1 - 4.
page flip password = 1 - 50 ASCII characters.
SEND COMMAND Panel,"'^PWD-1,Main'"
"'^VOL-<volume level>'"
volume level = 0 - 100. 100 is maximum volume setting.
SEND_COMMAND Panel,"'^VOL-50'"
NXD/T-1200V Wall/Flush Mount Touch Panel