Product Specifications; Printer Specifications - MUTOH ValueJet VJ-1638UH Operation Manual

8 Appendix
8.1

Product specifications

8.1.1

Printer specifications

Item
Model name
Printing method
Drive system
Media feed system
Media fixing system
Media feed/ejection
Rigid media Weight
Maximum length
Maximum width
Maximum thickness
Maximum print width 1,615 mm
Roll media Outer diameter
Tube diameter
Weight
Maximum width
Maximum thickness
Maximum print width 1,615 mm
Print margin
Media cut system
Head height adjustment
CPU
Memory
Command
Interface
Ink Supply system
ink cartridge
368
VJ-1638UH
On-demand piezo drive system
Firmware servo/DC motor drive
Multipoint pressurizing grid roller system
Pressurization roller down system by manual lever
Roll media: Rear feeding/Front ejecting
Rigid media: Rear feeding/Front ejecting
15 kg or less
1,200 mm
1,625 mm
15 mm (warpage of less than 1 mm)
150 mm or less
3 inch
30 kg or less
1,625 mm
0.5 mm
<Rigid Media>
Front: Max 5 mm(When layer printing: 25 mm), Rear: Max 40 mm,
Left: 5 mm to 80 mm, Right: 5 mm to 80 mm
<Roll Media>
Front: Max 15 mm(When layer printing: 35 mm)(For continuous print: 5 mm),
Rear: 5 mm (Maximum end edge of media is 40 mm), Left: 5 mm to 80 mm,
Right: 5 mm to 80 mm
Horizontal manual cut system
Automatic height adjustment
64-bit RISC CPU
384MB
MH-RTL (RTL-PASS)
Ethernet (100BASE-TX/100BASE-T)
Supplied through tubes from independent color cartridges
Black, Cyan, Magenta, Yellow, White, Varnish: 220 ml each
(7.43 fl oz each)
VJ-1638UH OPERATION MANUAL
Specification
8.1 Product specifications