Selecting The Reception Mode (Setting Rx Mode) - NEC NEFAX 805 Operation Manual

Basic Fax Operation (1)
5. Press the No/Clear key to exit from the
OPERATION
reappears.

3.2.2. Selecting the Reception Mode (Setting RX Mode)

1) Overview of the Reception Mode
Your machine may be in either one of the following two modes when receiving a
document from the other party. Select the appropriate mode according as how you
are going to receive the document.
Fax mode (Auto RX mode)
Select this mode when you use your machine mainly as a fax machine. When a
document comes in, your machine rings several times before starting an automatic
reception. The number of rings can be set as required. see"7.4.1 Setting No. of
Rings" P 7-21
TEL mode (Manual RX mode)
Select this mode when you use your machine mainly as a telephone. To receive a
fax document, pick up the Handset, if you hear a fax tone, press the Start Key and
hang-up to receive it manually. Note that in this mode you cannot receive a
document automatically.
2) How to select the reception mode
1. Press the Utility key 5 times into the
OPERATION
2. Press "7" of the Numeric keys to show "7 RX
Mode" on the Message Display.
3. Press the ◄ or ► key to select
or MANUAL RX
"
mode. Then the initial screen
"
.
"
AUTO RX
"
.
"
3-21
RX
"
TEXT
RX
"
RX OPERATION?
YES / or 1-8
7 RX MODE
"
*AUTO RX
◄ , ► & YES
No
C
1
Utility
x 5
▲
▼
PQRS
7
MANUAL RX