Using the Enhanced Utilities (2)
7.2.3 Setting MANUAL DENSITY
Set initial value of manual density level.
1. Press the Utility key 2 times then the display
appears the message "COPY SETTING".
2. Press "3" of Numeric keys. Then the following
message appears briefly to confirm your
selection.
3. Press ◄ or ► key to select the desired
density as default setting and press Yes key.
4. Press No/Clear key, back to the initial state.
7.2.4 Setting DENSITY(ADF)
Adjust the copy image density level when optional Automatic Document Feeder is
installed. This setting varies the gamma curve setting according to the type of originals
frequently used.
Setting
MODE 1 When the standard original (text original) is used.
MODE 2 To give better reproduction of a faint original.
1. Press the Utility key 2 times then the display
appears the message "COPY SETTING".
COPY SETTING?
OK=YES / or 1-6
3 MANUAL DENSITY
LIGHT
◄ , ► & YES
COPY SETTING?
OK=YES / or 1-6
Description
COPY SETTING?
OK=YES / or 1-6
7-13
Utility
x 2
▲
▼
DEF
3
DARK
Yes
▲
▼
No
C
Default
*
Utility
x 2
▲
▼