How To Receive A Document - Basics - NEC NEFAX 805 Operation Manual

Basic Fax Operation (1)
6. Press the Yes key.
The machine now search for the exact name or possible names
beginning with the letters entered. Here you can find 2
destinations searched.
Press the ▲ or ▼ key to locate the party to whom you
are going to transmit a document.
Each press of the arrow key shows the next party name
on the Message Display
Once the correct destination is displayed, press the Start key.
The machine now starts dialing the fax number and it starts feeding the document.
Press the Stop key if you want to stop the transmission.
When the transmission is completed, a buzzer sounds
and the message "TX COMPLETE" is shown for 2
sec., indicating that the document has been
successfully transmitted to the other party.
If you want to know the result of the transmission, check it either by using the
Confirm function P 8-1 or by printing the Activity Report. P 9-11

3.2. How to Receive a Document - Basics

Overview of the Basic Reception Procedure
A document can be received in several different ways. This section explains how to
receive a document and directly print it on your fax machine without using the
memory function. For the procedure using the memory function (memory reception),
see "Printing the Document of Received by Memory RX mode" P 6-23
Before receiving a document, the following functions must be set.
Reception Mode P 3-21
This determines the mode in which your machine should be set to receive a
document from the other party.
Print Mode P 3-20
This determines the zoom ratio at which the document received from the other
party is to be printed through your machine printer.
TOKYO (2)
SEARCH = YES (SEE=▼ ▲)
* TOKYO1
OK = START
* TX COMPLETE *
TOKYO
3-19
Yes
Start
1
▲
▼