Table of Contents
Advertisement
Basic Fax Operation (1)
NOTE:
For any of the following types of documents, make a copy prior to transmission or use
the Carrier Sheet for transmission.
• A page with a width or length smaller than the minimum permissible dimensions.
Minimum permissible dimensions:
• A lightweight page weighing 50 g/m
• A creased, torn, wrinkled, or curled page.
• OHP transparencies.
• A page with a stamp on it, or a page with adhesive tape affixed to it.
• Paper with a coated surface.
• Heat- or pressure-sensitive paper.
• Glossy paper.
Useful Tips
If your document is very important, confidential or for an emergency, it is
recommended that you make a phone call to tell the other party that you are sending
the document.
How to load the Document
This machine scans the data on the front side of the document. This means
that you should place the document face up on your.
You can transmit the document with the date printed at the top of the
document by the Header function. ( P 6-20) To use the Header function
properly, load the document top edge down. When sending a multi-page
document, the machine scans from the top down. A document placed in the
feeder such as page 1, page 2, .... page X will be sent in the same order.
Document ejecting style is straight-ahead ejection. The same rule applies
when placing your document for the copy or scanner function.
1. Check that the message display is in Fax
screen.
If not, press the Copy/Fax key to switch.
Width .......148 mm
Length .......100 mm
2
or less.
JAN.01 15:38
-SET DOC. FACE UP-
3-5
100%
Advertisement
Table of Contents
