NEC NEFAX 805 Operation Manual page 107

Using the Function Utilities
NOTE:
• If you want to use other FUNCTION utilities in combination with Timer TX, when
LCD display: "ENTER FAX NO." then press the Function key, and select the
function you want. However, only the following three features can be used together
with Timer TX:
For setting the FUNCTION utilities to be used in combination with Timer TX, see the
relevant pages dealing with those features for greater detail.
• All fax transmission functions can be used even while the machine is in the standby
state for Timer TX.
• When you changed the contents of the destination registered in One Touch Dial key
and Speed Dial key before starting the Timer transmission, the changed destination is
deleted from the destinations to which you want to perform the Timer transmission.
If you want to perform the Timer transmission to the changed destination, you need
to set the Timer TX again.
For example:
1. At time: 12:00 , you set the Timer transmission by the Broadcast.
Transmission time: 23:00
Transmission party: One Touch key 01, 02, 03
2. At time: 15:00 , if you change the setting of the One Touch key 01
Change the fax number of One Touch key 01, then One Touch key 01 is
automatically deleted from the Timer and Broadcast transmission.
Transmission time: 23:00
Transmission party: One Touch key 02, 03
3. Add One Touch key 01 to the Timer transmission again, if you need
Add the new One Touch key 01 to the Timer transmission.
Transmission time: 23:00
Transmission party: One Touch key 01, 02, 03
Broadcast P 5-4
µ
Mailbox TX P 5-14
µ
Polling RX P 5-23
µ
5-13