Polling Rx - NEC NEFAX 805 Operation Manual

Using the Function Utilities

5.6 Polling RX

Overview of the Polling RX function
Polling RX starts from your end, the transmission of a document that has been put in the
ready state at the other party's end, to receive that document at your end.
The other party must be ready for polling transmission before you can receive a document
by Polling RX.
To receive (poll) the document, you need to enter the correct polling ID number.
At one operation, you can poll up to 143 destinations by following operations:
One-Touch (27) + Seed Dial (100) + by numeric keys(16) = 143
How to use the Polling RX function
1. Check there is no document on the document feeding tray.
2. Press the Function Key.
3. Press '6' to select the POLLING RX.
The following message appears briefly to
confirm your selection.
4. Enter the remote fax number.
For example: Use the numeric keys to input
the fax number "0123456'
OPER
1
0
If the remote fax machine have the polling ID, press the
key.
▼
ABC DEF GHI
2 3 4
5-23
Function
FUNCTION
SEL. 1-8 / or FUNCTION
MNO
6
6 POLLING RX
NO.001 =_
JKL
MNO
5
6
NO.001 =0123456_
OK=YES ( POLL ID=
POLLING ID =_
OK=YES
)
▼