Using the Enhanced Utilities (2)
2. Press "1" of Numeric keys. Then the following
message appears briefly to confirm your
selection.
3. Press ◄ or ► key to select AUTO,
MANUAL or PHOTO as default setting
and press Yes key.
4. Press No/Clear key, back to the initial state.
7.2.2 Setting AUTO DENSITY
Set density level of Automatic Density adjustment.
1. Press the Utility key 2 times, then the message
"COPY SETTING" appears.
2. Press "2" of Numeric keys. Then the
following message appears briefly to
confirm your selection.
3. Press ◄ or ► key to select the desired
density as default setting and press Yes key.
4. Press No/Clear key, back to the initial state.
1 DENSITY/PHOTO
* AUTO MANUAL PHOTO
◄ , ► & YES
COPY SETTING?
OK=YES / or 1-6
2 AUTO DENSITY
LIGHT
◄ , ► & YES
7-12
1
Yes
No
C
Utility
x 2
▲
▼
ABC
2
DARK
Yes
No
C