Table of Contents
Advertisement
Basic Fax Operation (1)
3.1.3.2.Using the One Touch Dial Function
The One Touch Dial function allows you to transmit a document to a
particular party by pressing one of the One Touch Keys which has previously
been programmed with that party's information.
To use this function, you must previously register each One-Touch keys with
fax NO. and other data.
For more detailed register procedures, see "Dial Registration"
1. Check that the message display is shown
Fax screen.
If not, press the Copy/Fax key to switch.
2. Place the document into the Document
Feeding Tray.
3. Press the One Touch key in which the
desired party has been programmed.
For example: One Touch key 08 = OSAKA
The machine now starts dialing the fax number and it starts feeding the
document.
If you want to stop the transmission, press the Stop key,
the display appears as below.
Then press the Yes key, the transmission now be
canceled.
JAN.01 15:38
-SET DOC. FACE UP-
TX CANCEL?
YES / CONTINUE=NO
3-10
P 6-5
100%
08
H
Stop
Yes
Advertisement
Table of Contents
