Set The Name - NEC NEFAX 805 Operation Manual

Using the Enhanced Utilities (1)
NOTE:
When changing the data of the destination registered for One Touch Dial and Speed
Dial, be careful of the following things:
• When One-Touch or Speed dial which are previously registered in Group dial or
Program dial are deleted, these destination in Group dial /Program dial are deleted.
• When One-Touch or Speed dial are changed, it is selectable whether to delete or to
save the edited dial in Group dial /Program on edit procedure.
• When you want to transmit to the changed destination with each function of Group,
Program and Timer, you need to reset each function again.
For example:
At 12:00, you register a Group dial (contain One Touch Dial 01, 02, 03 )
At 15:00, you register the One Touch Dial 01 again.
The result is Group dial becomes to contain only One Touch 02 and 03, One Touch
Dial 01 is automatically deleted from the Group transmission.

6.2.1.2 Set the Name

1. Using the One-Touch keys, enter the name
of the destination.
A name can consist of up to 20 characters.
For examples: OSAKA
If a wrong name has been entered, press ◄ key. The
cursor position moves back one position. Enter the
correct name again.
Press the No/Clear key to clear the entry, the message
display returns to the previous display to enter the name
again.
2. Check your data entry and press the Yes key to validate
the name setting.
NAME=OSAKA_
OK=YES
NAME=OSAKA
OK=YES
NAME=_
OK=YES
6-8
No
C
Yes