Table of Contents
Advertisement
Troubleshooting
The copy has unintended
specks or spots
Unintended markings
appears along the edge of
the copy
The copy appears uneven
or at a tilt
The surface of the original
glass is dirty
The original pad is dirty
The original document is
a second-generation copy
or an OHP transparency
(or other translucent
media), etc.
Image from the backside
of a double-sided
document may be
reproduced when the front
side is copied.
The original pad is dirty
The selected paper size is
larger than the original
document
The original document is
not placed in the proper
orientation on the
The zoom ratio setting
does not math the size of
the original document
The original document has
not been set properly
(more)
11-5
Wipe the original glass
clean with a soft cloth
Wipe the original pad
clean with a soft cloth
Set a blank sheet of
paper over the original
document
Lower the density
level ,using the density
adjustment keys
Auto/
Photo
Wipe the original pad
clean with a soft cloth
Specify a paper size that
is appropriate to the
original document
Place the original
document correctly on
the original glass
Select a suitable zoom
ratio setting
Set the scale of the
original document
properly.
Adjust the document
guide plates properly
when the original
document is placed into
the Automatic
Document Feeder.
Advertisement
Table of Contents
