Table of Contents
Advertisement
First Things to Know About Your Machine
Error
PC
Utility
Memory TX
Confirm
NOTE:
• While the machine is warming up, it can receive or transmit a document, but not print a
document received.
• After completing warm-up, the machine enters the Power Save mode automatically
when you do not use the machine for a long time.
• You can set the time it takes to enter the Power Save mode, or turn the mode OFF
through the Utility key.
1.1.2 Turning the Machine Power OFF
1 Check that the memory volume display on
the Message Display shows 100%.
If the percentage shown is less than 100%, it means that there are documents stored
in memory which have not been transmitted. In this case, perform the following steps
to retain these documents.
When the memory contains a document to be transmitted:
Output the Memory Image Print, and retransmit at another time.
When the memory contains a document received:
Let the machine print the document received according to the specific procedure as
follows.
Printing the Document Received by Memory RX Mode
Printing the Mailbox Document
Auto RX
2in1
Standard
Sort
Fine
Super Fine
Half Tone
Resolution
TEXT
x1.00
[ ] A
A4
1
Auto/
Photo
Paper
JAN.01 15:38
-SET DOC. FACE UP-
P 5-16
1-2
Yes
1
No
C
Zoom
Space
Delete
100%
P 6-23
Advertisement
Table of Contents
