Table of Contents
Advertisement
Using the Enhanced Utilities (2)
7.1.7 Setting REMOTE MONITOR
This function allows service personnel to access the unit remotely. It is possible for the
Service Representative to monitor and change machine settings. This allows them to fix
your unit over telephone.
1. Press the Utility key then the message
"MACHINE SETTING" appears.
2. Press "7" of Numeric keys. Then the following
message appears briefly to confirm your
selection.
3. Press ◄ or ► key to select ON or OFF as
default setting and press Yes key.
4. The message prompt you to enter the 4-digit
password. For example:1234.
5. Press No/Clear key, back to the initial state.
7.1.8 Setting TRAY 1 PAPER SIZE
(When optional Paper Feed Unit is installed)
This function allows you to choose the paper size in tray 1. Please set the paper size
according to the paper placed in Paper Tray (TRAY1), otherwise, after first printing an
error message appears, you should remove the paper and replace the paper with correct
size in Paper Tray (TRAY1) again.
MACHINE SETTING?
OK=YES / or 1-7
7 REMOTE MONITOR
* ON
◄ , ► & YES
REMOTE PASSWORD=_
7-8
Utility
▲
▼
PQRS
7
OFF
Yes
No
C
Advertisement
Table of Contents
