Setting Page Count Tx - NEC NEFAX 805 Operation Manual

Using the Enhanced Utilities (2)
2. Press "2" of Numeric keys. Then the
following message appears briefly to confirm
your selection.
3. Press ◄ or ► key to select the desired
resolution as default setting (Standard /Fine
/Super Fine /Half Tone)and then press Yes
key.
If you select "H/F" then the message
appears to ask the quality of Half tone,
PRESS ◄ or ► key to select the desired
setting, then press the Yes key to accept this
selection.
4. Press No/Clear key, back to the initial state.

7.3.3 Setting PAGE COUNT TX

When Page Count TX is set to ON, before transmit the original documents are scanned
into memory and judged whether the page count is correct or not. This function is used to
ensure the original documents are not misfed in Document Feeding Tray.
1. Press the Utility key 4 times then the display
appears the message "TX OPERATION".
2. Press "3" of Numeric keys. Then the following
message appears briefly to confirm your
selection.
3. Press ◄ or ► key to select ON or OFF as
default setting and press Yes
key.
2 RESOLUTION
*STD
◄ , ► & YES
*STD
◄ , ► & YES
TX OPERATION?
OK=YES / or 1-7
3 PAGE COUNT TX
*ON
Yes
◄ , ► & YES
7-17
ABC
2
F S/F H/T
FINE S/F
No
C
Utility
x 4
▲
▼
DEF
3
OFF