Using Batch Tx - NEC NEFAX 805 Operation Manual

Using the Enhanced Utilities (1)
The machine starts scanning.
After completely scanning the document, the
machine enters the standby state for timer
transmission while showing the initial screen
on the Message Display.
NOTE:
The machine operation differs after the pressing of the One Touch key in step
2 depending on the function registered in Program Dial. For details, see the
relevant pages explaining the corresponding functions.

6.2.4 Using Batch TX

Overview of the BATCH TX function
You can program your single location one-touch keys to batch documents automatically.
By assigning a batch time to a programmed one-touch key, you can eliminate dialing the
same number several times a day. Your FAX unit calls the other unit at a preset time and
transmits all documents stored in memory during the same call.
How to set up the BATCH TX
1. Press Utility key 3 times.
2. Press '5' of the Numeric keys, the following message
appears briefly to confirm your selection.
3. Press the one-touch key that you want to
program.
Before you use the Batch feature, you have to
set the telephone number on the one-touch
key the display will appear the message as
shown.
4. Enter the batch time by Numeric keys then
press the Yes key.
JAN. 04 11:30
-SET DOC. FACE UP-
5 BATCH TX
-SELECT REGIST.KEY-
* NOT REGISERED *
TX TIME =21:00
OK=YES
6-18
T 92%
Utility
x 3
JKL
5
(DEL=NO)