Setting 2In1 Mode - NEC NEFAX 805 Operation Manual

Using the Enhanced Utilities (2)
2. Press "4" of Numeric keys. Then the following
message appears briefly to confirm your
selection.
3. Press ◄ or ► key to select Mode 1 or Mode 2
as the default setting.
Then press Yes key.
4. Press No/Clear key, back to the initial state.

7.2.5 Setting 2in1 MODE

Set the initial value of 2in1 function. It is possible to set when additional
memory is installed.
1. Press the Utility key 2 times then the display
appears the message "COPY SETTING".
2. Press "5" of Numeric keys. Then the following
message appears briefly to confirm your
selection.
3. Press ◄ or ► key to select ON or OFF as
default setting and press Yes key.
4 DENSITY (ADF)
*MODE 1
◄ , ► & YES
COPY SETTING?
OK=YES / or 1-6
5 2in1 MODE
*ON
◄ , ► & YES
7-14
GHI
4
MODE 2
Yes
No
C
Utility
x 2
▲
▼
JKL
5
OFF
Yes