Setting Sort Mode; More About Tx Operation; Setting Scan Contrast - NEC NEFAX 805 Operation Manual

Using the Enhanced Utilities (2)
4. Press No/Clear key, back to the initial state.

7.2.6 Setting SORT MODE

Set the initial value of Sort function. It is possible to set when additional
memory and Paper Feed Unit are installed.
1. Press the Utility key 2 times then the display
appears the message "COPY SETTING".
2. Press "6" of Numeric keys. Then the following
message appears briefly to confirm your
selection.
3. Press the ◄ or ► key to select SORT or
NON-SORT as the default setting.
Then press Yes key.
4. Press No/Clear key, back to the initial state.

7.3 More about TX Operation

This section describes the choice available in TX operation menu.

7.3.1 Setting SCAN CONTRAST

There are five contrast levels that you can select depending on your original document.
For documents with very fine or light characters, choose a lighter level.
COPY SETTING?
OK=YES / or 1-6
COPY SETTING?
OK=YES / or 1-6
6 SORT MODE
*SORT
◄ , ► & YES
7-15
▲
▼
No
C
Utility
x 2
▲
▼
MNO
6
NON-SORT
Yes
No
C