NEC UX5000 Hardware Manual page 52

Chapter 1 - Installing the Chassis
5. With a double chassis setup, position the metal support bracket as shown below and secure with the 4
screws provided.
Figure 1-53:
6. At the ends of the brackets, reinstall the screws removed in Step 2 which held in the G and H metal
tabs. The screw heads should be left approximately 1/16" above the bracket.
1 - 40
ATTACHING 2 CHASSIS TO THE METAL SUPPORT BRACKET
Partially Insert Screws
Figure 1-54: REINSTALL SCREWS
Secure with
4 Screws
Metal Support
Bracket
Leave screw head
approximately 1/16"
abouve plastic bracket.
Chapter 1