8.
Figure 1-35:
9.
10.
11.
12.
Chapter 1
Connect the battery cables provided with the battery box as shown below. The black cable is
attached to the negative connector on the right-side battery. The blue cable is attached from
the positive connector on the right-side battery to the negative connector on the left-side
battery. The red cable is attached from the positve connector of the left-side battery.
CONNECT THE POLARITY-SENSITIVE BATTERY CABLES
●
Be sure to connect the cables as shown
the cables is incorrect, it can cause the fuses in the battery box to blow, or
it may also cause a fire.
Route the cables out of the battery box, securing them into the grooves in the tray
Battery Cable
Figure 1-36:
ROUTE BATTERY CABLES AND REPLACE COVER
Replace the cover and reattach the two screws.
Repeat steps 5-10 for the remaining battery compartments.
Reinstall the metal retaining bracket removed in step 4 and secure with the 2 screws.
! Important !
Tighten Screw
Place cables in cable guide
Chapter 1 - Installing the Chassis
. If the polarity connection of
Battery Tray Cover
Tighten Screw
Make sure cables
are inside the tray
1 - 27