Installing The 4Tliu Blade - NEC UX5000 Hardware Manual

2.7.4.4

Installing the 4TLIU Blade:

1.
2.
3.
Chapter 2
Figure 2-35:
Install the 4TLIU into a slot.
●
With normal operation, the status LED will flash fast. If trouble was found during the self
diagnostics routine, the status LED will flash slow.
Use Program 10-03-02 to set to 2- or 4-wire.
Use Program 10-03-03 to select Type I or V.
Chapter 2 - Blade Installation and Startup
CONTROL SIGNAL CONNECTION
2 - 73