Programming The Ip Terminal For The Dial Pad And Line Key Kit - NEC UX5000 Hardware Manual

Chapter 4 - Terminals and Optional Equipment
4.12.4

Programming the IP Terminal for the Dial Pad and Line Key Kit

1. Enter the terminal's program mode by pressing HOLD CONF * #.
2. At the log-in screen, enter the user name (default: ADMIN) and password (default: 6633222) and press
the OK Soft Key.
3. Press Soft Key 3 for "Maintenance Setting".
4. Press Soft Key 4 for "Adjust".
5. Press Soft Key 2 for "Key Kit Type".
6. Select the type of dial button kit being used by pressing the Up/Down key.
7. Press Soft Key 4 for "Next".
8. Select the type of line key kit being used by pressing the Up/Down key. By default, the correct line key kit
for the dial button kit selected above will be highlighted.
9. Press Soft Key 4 for "OK" to complete.
10. Continue pressing Soft Key 4 to exit (Exit-Exit-Save). The terminal will reset automatically.
4 - 36
Line Key Entry
Kit1 Type A - Japan with cursor key
Kit2
Kit3
Kit4
Kit8 32 Line Key without cursor key
Kit 9 Type A - Japan without cursor key
Kit10 Type A - US without cursor key
Kit11 Type B - US without cursor key
Kit12
Line Key Entry
Line12
Line24
Line32
Line8
Line6
Line2
Line0
Description
Type A - US with cursor key
Type B - US with cursor key
Description
Enhanced 12-Button
Enhanced 24-Button
Enhanced 32-Button
DESI-Less
Value 6-Button
Value 2-Button
IP-CTS
Chapter 4