Digital/Slt Combination Blade (082U) (Figure 2-25) - P/N 0911058; Led Indications - NEC UX5000 Hardware Manual

Chapter 2 - Blade Installation and Startup
2.5.4
Digital/SLT Combination Blade (082U) (Figure 2-25)
The Digital/SLT Combination blade provides 8 digital ports and 2 analog ports. This blade allows for
either a 4COIU analog trunk daughter board or 2BRI daughter board to be installed.
The blade provides:
Without a MEMDB installed, only 1 082U blade can be installed in the system. With a MEMDB,
multiple 082U blades can be installed in the communications server - however, only one 082U blade
can be installed in a 9.5" base chassis or 1 per 19" chassis (for a maximum of 4 082U blades per
communications server). When connecting this blade, the system uses 8 digital port and 2 analog
ports. The blade consumes 10 logical ports (2 analog, 2 digital) plus any ports used by any attached
daughter board.
●
2.5.4.1

LED Indications

Live LED
(1 second)
(100 ms)
2 - 48
●
8 digital ports
●
2 analog ports
●
2 status LEDs
Blades with "IP3NE" included as part of the blade name printed on the card
cannot be combined with any "IP3WW" version blades. The "IP3NE" are U.S.
versions, while the "IP3WW" are international versions of the blades.
LED Indication
Busy LED
(green) (red)
On On
Flashing On
Flashing
(1 second)
Flashing On
Off
Off On
Off
Flashing
(80 ms on/
off x 3/400
ms off)
- P/N 0911058
Operation Status
Blade initializing
Blade assignment refused (system
capacity exceeded or software
version incorrect)
Trouble found during self-
diagnostics routine.
Normal operation
Blocked blade
Downloading firmware
Operation Status
At least 1 channel busy
All channels idle
At least 1 channel busy
All channels idle
Chapter 2