Installing The Long-Term Battery Box - NEC UX5000 Hardware Manual

1.6.2.1

Installing the Long-Term Battery Box

1.
2.
Screws
Figure 1-31:
3.
Chapter 1
Position the floor-mount box in a location which provides enough access around the unit to
allow for access to the equipment. Secure the box with 4 10mm anchor bolts.
Place the long-term battery box on top of the floor-mount box. Secure the unit by attaching the
upper joint brackets to either side of the battery box and floor-mount box. Four screws total on
each bracket are used - two screw into the battery box and two screw into the floor-mount box.
Upper Joint Bracket
Floor Mount Box
MOUNTING BATTERY BOX TO FLOOR MOUNT BOX
Remove the screw on the right side of the front cover of the battery box. Slide the cover to the
right slightly and remove it.
Battery Box
Slide Right
and Remove
Front Cover
Figure 1-32: REMOVE FRONT COVER OF BATTERY BOX
Battery Box
Upper Joint Bracket
Remove Screw
Chapter 1 - Installing the Chassis
Screws
1 - 25