NEC UX5000 Hardware Manual page 218

Chapter 4 - Terminals and Optional Equipment
ESIU Blade
CN1
CN2
CN3
4 - 24
CN2 or CN3
To 8/16
PGDAD Module
Figure 4-15: 2PGDAD CABLE CONNECTION
The 2PGDAD module provides amplifiers for each page output port (for a
maximum of +8 dBM, 600 ohms at 1KHz). No additional page amplification is
provided by the 2PGDAD module and, if required, an external page amplifier
can be used for additional amplification.
The page output of the CCPU does not provide any amplification (for a
maximum output of -3 dBm, 600 ohms at 1KHz).
External Page
Page Control
External Relay
AC 117V
Relay 8
Relay 7
Relay 6 - for CN3
Relay 5 - for CN2
Chapter 4