Replacing The Fuses In A Short-Term Battery Box - NEC UX5000 Hardware Manual

1.6.1.3

Replacing the Fuses in a Short-Term Battery Box

1.
2.
3.
Figure 1-27:
4.
5.
6.
7.
Chapter 1
●
Only replace with fuses of the same rating.
●
Fuses may be hot. Use caution when replacing them.
Correct the issue which caused the fuse problem.
●
Replacing fuses without first correcting the issue could cause a fire and/or electric shock
hazard.
Make sure to unplug the unit from the electrical outlet prior to removing the
connection cables within the battery box unit.
Unplug all the cable connectors from the battery box.
Main Chassis
REMOVING THE SMALL BATTERY BOX AND CABLE
Loosen the two thumb screws on the battery box and remove the box by pulling on the two
thumb screws.
Replace the fuse(s) as needed.
Replace the battery box and tighten the thumb screws on either side of the box.
Replace the battery connection cables to the battery box.
Battery Box
Figure 1-28: REPLACING THE SMALL BATTERY BOX FUSE
Chapter 1 - Installing the Chassis
! Important !
Screws
Battery Box
Battery Cable
Battery Connector
Fuse
1 - 23