NEC UX5000 Hardware Manual page 23

2. Secure the metal bracket to the Base chassis with the 3 screws provided.
3. Align the back board connector up for the Base and Expansion chassis and push the two chassis
together. Make sure the two screws on the bracket are positioned high enough to allow chassis enough
space to connect.
Chapter 1
Base Chassis
Bracket for Connection
Figure 1-8: ATTACH THE EXPANSION BRACKET
Make sure screw has enough
clearance to fit into slot
Figure 1-9: POSITION FOR CONNECTING SCREW
Chapter 1 - Installing the Chassis
1 - 11