Cylinder Head Cover - Installation - MTU 12V4000L32F Operating Instructions Manual

7.4.5 Cylinder head cover ‒ Installation
Special tools, Material, Spare parts
Designation / Use
Gasket
NOTICE
Contamination of components.
Damage to component!
• Observe manufacturer's instructions.
• Check components for special cleanliness.
Cylinder head cover ‒ Installa-
tion
1. Clean mounting surface.
2. Check condition of gasket, replace if dam-
aged.
3. Position gasket and cylinder head cover (1)
on cylinder head.
4. Insert screws (2) in cylinder head cover and
tighten them.
Note: The locking plate must be removed from the
cylinder head cover.
5. Install spark plug connector (→ Page 174).
184 | Valve Drive | MS150104/03E 2017-09
Part No.
(→ Spare Parts Catalog)
Qty.