Bottom Trim And Feet - HP EliteOne 705 G2 Maintenance & Service Manual

Bottom trim and feet

The bottom trim is secured with three screws. The two outer screws also secure the feet.
Bottom trim location:
Feet locations:
To remove the bottom trim and feet:
1. Prepare the computer for disassembly (see
2. Remove the rear port cover (see
3. Remove the stand (see
4. Remove the access panel (see
5. Remove the optical drive (see
6. Remove the system board shield (see
7. Remove the heat sink (see
8. Remove the system board (see
9. Remove the speakers (see
10. Remove the top trim (see
11. Remove the right trim (see
12. Remove the two Torx screws that secure the feet (1), and the Torx screw that secures the bottom trim
(2) to the computer.
Preparing to disassemble the computer on page
Rear port cover on page
Attaching and removing a stand on page
Access panel on page
Optical drive on page
System board (EMI) shield on page
Heat sink on page 59).
System board on page
Speakers on page 74).
Top trim on page 45).
Right trim and fingerprint reader on page
31).
32).
37).
41).
48).
64).
80).
31).
Bottom trim and feet 83