HP EliteOne 705 G2 Maintenance & Service Manual page 76

5. If necessary, press
6. Edit the fields listed. If the feature byte has data or is not editable, then it was not cleared and cannot be
edited.
System ID Setup Page
Setup Field Name
Product Name
Serial Number
SKU Number
Asset Tag
Feature Byte
Build ID
66 Chapter 4 Removal and Replacement Procedures
Ctrl+A to initiate edit mode.
Enter the Model name/number or marketing name.
Enter the Serial Number of Unit.
Enter the SKU or Product Number including Localization Code.
Enter the 18-byte identifier assigned to the computer.
Enter the Feature Byte string. The feature byte string is case sensitive.
The label includes spaces after every four characters. You can enter or ignore these
spaces – their only purpose is to help with data entry. There is a character
limitation of 40 bytes per line. When you reach this limit, go to the next line to
continue data entry. BIOS ignores the spaces and lines.
If you make an error during data entry, the data will not validate, and the computer
asks you to correct your data input.
The Build ID of the unit.
Comment Label
Flexbuild
Support
Support
Support
Flexbuild
Flexbuild